HC-2X Steel Pipe Hole Cutting Machine – Up to 114 mm
- Model
- HC-2X
Item specifics
- Cutting Capacity
- Up To 4" (114mm)
- Pipe Mounting Capacity
- 1 1/4"-8"(32mm-200 mm)
- Drill Chuck Capacity
- 1/16"-5/8"(2mm-16 mm)
- Drill Chuck Speed
- 110RPM
- Current Draw Rating
- 8 Amps @ 220-240V / 15 Amps @ 120V
- Weight
- 28 lbs. (12.8 Kg)
- Packing Size:
- 32*32*63CM
Review
Description
HC-2X Pipe Hole Cutting Machine
High-Torque Steel Pipe Hole Cutting up to 114 mm
Pipe Hole Cutting Machine Features
HC-2X Key Features
● Steel Pipe Hole Cutting — Cuts holes up to 114 mm in steel pipes for branch connections and installation work.
● High-Torque Drive — A low-noise gear reduction motor delivers high torque for large-diameter hole cutting.
● Flexible Feed Operation — Operate from either the left or right side to suit the working position.
● Multiple Hole Alignment — A rotating level built into the base helps align repeated holes along the pipe.
Pipe Roll Grooving Machine Parameter
Model: | HC-2X |
Suitable Material: | Carbon Steel Pipes, PE Pipes |
Cutting Capacity: | up to 4"(114mm) |
Pipe Mounting Capacity: | 1 1/4"- 8"(32mm-200 mm) |
Drill Chuck Capacity: | 1/16"- 5/8"(2mm-16 mm) |
Drill Chuck Speed: | 110RPM |
Current Draw Rating: | 8 Amps @ 220-240V15 Amps @ 120V |
Packing Gross Weight: | 46 lbs. (21 Kg) |
Packing Size: | 32*32*63CM |
Drive Unit
Catalog No. | Phase | Power | Voltage | Frequency |
910020 | Single | 700W | 220V | 50/60Hz |
910021 | Single | 700W | 110V | 50/60Hz |
Pipe Hole Cutting Machine Configuration
High-Torque Gear Motor
The low-noise gear reduction motor delivers high torque for steady hole cutting in steel pipes.
Drill Chuck
The 2–16 mm drill chuck accepts different hole saw arbors for a range of hole sizes.
Built-In Level
A rotating level in the base helps position and align multiple holes along the pipe.
Left- or Right-Side Feed
Feed operation from either side allows the operator to choose a convenient working position.
Resources of HC-2X Roll Grooving Machine
HC-2X Workshop & Production
